example Linear elastic response spectra
Generate the linear elastic response spectra of an earthquake suite using OpenSeismoMatlab.
Contents
Input
Earthquake motions
eqmotions={'Imperial Valley'; % Imperial valley 1979 'Kocaeli'; 'Loma Prieta'; 'Northridge'; 'San Fernando'; 'Spitak'; 'Cape Mendocino'; 'ChiChi'; 'elcentro_NS_trunc'; % Imperial valley 1940 'Hollister'; 'Kobe'};
Set the eigenperiod range for which the response spectra will be calculated.
Tspectra=(0.01:0.01:4)';
Set critical damping ratio of the response spectra to be calculated.
ksi=0.05;
Extract linear elastic response spectra
sw='elrs';
Calculation
Initialize LERS
LERS=cell(numel(eqmotions),1);
Calculation of peak values
for i=1:numel(eqmotions) % earthquake data=load([eqmotions{i},'.dat']); t=data(:,1); dt=t(2)-t(1); xgtt=data(:,2); S=OpenSeismoMatlab(dt,xgtt,sw,Tspectra,ksi); LERS{i}=[S.Period,S.Sd,S.PSv,S.PSa]; end
Output
Plot displacement response spectra
Fig1 = figure('units', 'centimeters', 'Position', [0,0, 20/sqrt(2), 20]); % Scan all subplots for i=1:numel(eqmotions) subplot(4,3,i) plot(LERS{i}(:,1),LERS{i}(:,2),'k','LineWidth',1); set(gca,'FontName','Times New Roman') title(eqmotions{i},'FontName','Times New Roman') ylabel('Sd','FontName','Times New Roman') xlabel('Period (s)','FontName','Times New Roman') axis tight end drawnow; pause(0.1)

Plot pseudo-velocity response spectra
Fig2 = figure('units', 'centimeters', 'Position', [0,0, 20/sqrt(2), 20]); % Scan all subplots for i=1:numel(eqmotions) subplot(4,3,i) plot(LERS{i}(:,1),LERS{i}(:,3),'k','LineWidth',1); set(gca,'FontName','Times New Roman') title(eqmotions{i},'FontName','Times New Roman') ylabel('PSv','FontName','Times New Roman') xlabel('Period (s)','FontName','Times New Roman') axis tight end drawnow; pause(0.1)

Plot pseudo-acceleration response spectra
Fig3 = figure('units', 'centimeters', 'Position', [0,0, 20/sqrt(2), 20]); % Scan all subplots for i=1:numel(eqmotions) subplot(4,3,i) plot(LERS{i}(:,1),LERS{i}(:,4),'k','LineWidth',1); set(gca,'FontName','Times New Roman') title(eqmotions{i},'FontName','Times New Roman') ylabel('PSa','FontName','Times New Roman') xlabel('Period (s)','FontName','Times New Roman') axis tight end drawnow; pause(0.1)

Copyright
Copyright (c) 2018-2023 by George Papazafeiropoulos
- Major, Infrastructure Engineer, Hellenic Air Force
- Civil Engineer, M.Sc., Ph.D.
- Email: gpapazafeiropoulos@yahoo.gr